|
|
| (2 intermediate revisions by the same user not shown) |
| Line 1: |
Line 1: |
| ITEM
| | #REDIRECT [[Park Tool Recommended Tool List]] |
| | |
| Work bench
| |
| | |
| Tool board – white pegboard with hooks
| |
| | |
| Repair stands – one per bench. There are
| |
| | |
| many options:
| |
| | |
| Repair stand for bikes that cannot be
| |
| | |
| clamped
| |
| | |
| Work stool
| |
| | |
| Parts washer
| |
| | |
| Vise
| |
| | |
| Axle vise jaws for vise
| |
| | |
| Wheel holder
| |
| | |
| Magnetic parts bowl
| |
| | |
| Bench grinder
| |
| | |
| Air compressor
| |
| | |
| Air line, fitting, quick couplers, air gun
| |
| | |
| Air chuck
| |
| | |
| Handlebar holder
| |
| | |
| GENERALHex wrench set – P-handle set with holder
| |
| | |
| 2, 2.5, 3, 4, 5, 6, 8, and 10 mm
| |
| | |
| With ball end
| |
| | |
| Hex wrench set – T-handle set with holder
| |
| | |
| 2, 2.5, 3, 4, 5, 6, 8, and 10 mm
| |
| | |
| Straight end with sliding handles
| |
| | |
| Hex wrench set – L-shaped set
| |
| | |
| 1.5, 2, 2.5, 3, 4, 5, 6, 8, and 10 mm
| |
| | |
| PARK TOOL # / DESCRIPTIONWORKSPACE
| |
| | |
| Hardware/tool store
| |
| | |
| Lumber supply –
| |
| | |
| available in 4’ x 8’ sheets
| |
| | |
| PRS-33.2
| |
| | |
| PRS-2.3-1
| |
| | |
| PRS-2.3-2
| |
| | |
| PRS-3.3-1
| |
| | |
| PRS-3.3-2
| |
| | |
| PRS-22.2
| |
| | |
| PRIMARYSECONDARY
| |
| | |
| STL-1.2 or STL-2
| |
| | |
| Hardware/tool store
| |
| | |
| 4” jaws with rotating base
| |
| | |
| AV-1 and AV-5
| |
| | |
| WH-1
| |
| | |
| MB-1
| |
| | |
| 6” wheel with coarse and fine
| |
| | |
| stones
| |
| | |
| Minimum 3.5 hp with 30 gallon
| |
| | |
| tank – larger if running air tools
| |
| | |
| Hardware/tool store
| |
| | |
| INF-2
| |
| | |
| HBH-2 or HBH-3
| |
| | |
| TOOLS
| |
| | |
| PH-1.2
| |
| | |
| THH-1
| |
| | |
| HXS-1.2
| |
| | |
| RECOMMENDED TOOL LIST FOR FULL-SERVICE BICYCLE RETAILERS
| |
| | |
| 2
| |
| | |
| ITEM
| |
| | |
| Hex wrench set – stubby set
| |
| | |
| 1.5, 2, 2.5, 3, 4, 5, 6 mm
| |
| | |
| Hex wrench – 3-Way – 4, 5, 6 mm
| |
| | |
| Hex wrench – 3-Way – 2, 2.5, 3 mm
| |
| | |
| Hex wrench – 3-Way – 4 mm, 5 mm, T25
| |
| | |
| Hex wrench – folding set
| |
| | |
| Hex wrench – 11 mm
| |
| | |
| Hex wrench – 12 mm
| |
| | |
| Hex wrench – 14 mm
| |
| | |
| Hex wrench – 15 mm
| |
| | |
| Star-shaped wrench set –
| |
| | |
| P-handle set with holder
| |
| | |
| T6, T8, T10, T-15, T-20, T-25, T-30, T40
| |
| | |
| With ball end
| |
| | |
| Star-shaped wrench set –
| |
| | |
| T-handle set holder
| |
| | |
| T6, T8, T10, T-15, T-20, T-25, T-30, T40
| |
| | |
| Straight end with sliding handles
| |
| | |
| 3/8” drive torque wrench
| |
| | |
| 2–14 Newton meters
| |
| | |
| 3/8” drive torque wrench
| |
| | |
| 10–60 Newton meters
| |
| | |
| 3/8” drive ratchet handle
| |
| | |
| 3/8” drive socket set, including:
| |
| | |
| 8, 9, 10, 11, 12, 13, 14, 15, 17, 19, 1” sockets
| |
| | |
| 3, 4, 5, 6, 8, 10, 14, and 16 mm hexes
| |
| | |
| 5, 6, 8, 10, 11, 12, and 15 mm long reach
| |
| | |
| 24, 26, 27, 28, 30, 32 mm flat sockets
| |
| | |
| Torque Limiter – 4 to 6 Newton meters
| |
| | |
| Metric calipers – digital or dial
| |
| | |
| Tape measure – metric and English
| |
| | |
| Thread pitch gauge
| |
| | |
| 6” machinist ruler
| |
| | |
| PARK TOOL # / DESCRIPTIONHXS-3
| |
| | |
| PRIMARYSECONDARY
| |
| | |
| AWS-1
| |
| | |
| AWS-3
| |
| | |
| AWS-7
| |
| | |
| AWS-10
| |
| | |
| HR-11
| |
| | |
| HR-12
| |
| | |
| HR-14
| |
| | |
| HR-15
| |
| | |
| PH-T1.2
| |
| | |
| THH-1
| |
| | |
| TW-5.2
| |
| | |
| TW-6.2
| |
| | |
| SWR-8
| |
| | |
| SBS-3
| |
| | |
| ATD-1.2
| |
| | |
| DC-1
| |
| | |
| RR-12
| |
| | |
| Hardware/toolHardware/toolstore
| |
| | |
| store
| |
| | |
| RECOMMENDED TOOL LIST FOR FULL-SERVICE BICYCLE RETAILERS
| |
| | |
| 3
| |
| | |
| ITEM
| |
| | |
| Scribe
| |
| | |
| Permanent marker
| |
| | |
| Screwdrivers – Phillips #0 & #2
| |
| | |
| Screwdrivers – 5/32” and 1/4” flat blades
| |
| | |
| Screwdriver – JIS tip
| |
| | |
| Combination wrenches – 6–17 mm
| |
| | |
| 6” adjustable wrench
| |
| | |
| 12” adjustable wrench
| |
| | |
| Pliers – diagonal side cutters
| |
| | |
| Pliers – Long nose pliers
| |
| | |
| Pliers – 6” slip-joint pliers
| |
| | |
| Snap ring pliers – set of five
| |
| | |
| 3-way electronic shifting tool
| |
| | |
| Hand drill – 3/8” chuck, reversible
| |
| | |
| Drill bit set and index
| |
| | |
| Center punch
| |
| | |
| 10” round file (“rat tail”)
| |
| | |
| 10” flat bastard file
| |
| | |
| 10” flat mill bastard file
| |
| | |
| File handles
| |
| | |
| 12” hacksaw with 24 TPI & 32 TPI blades
| |
| | |
| Tapered hand reamer
| |
| | |
| Tap Handle – smaller taps
| |
| | |
| Tap Handle – larger taps
| |
| | |
| Tap – M5 x 0.8 mm
| |
| | |
| Tap – M6 x 1.0 mm
| |
| | |
| Tap – M10 x 1.0 mm
| |
| | |
| Tap – 9/16” x 20 TPI (pedals)
| |
| | |
| RECOMMENDED TOOLPARK TOOL # / DESCRIPTIONHardware/tool store
| |
| | |
| Hardware/tool store
| |
| | |
| SD-SET
| |
| | |
| PRIMARYSECONDARY
| |
| | |
| DSD-2
| |
| | |
| MW-SET.2
| |
| | |
| PAW-6
| |
| | |
| PAW-12
| |
| | |
| SP-7
| |
| | |
| NP-6
| |
| | |
| Hardware/toolRP-SET.2
| |
| | |
| EWS-1
| |
| | |
| Hardware/toolHardware/toolHardware/toolHardware/toolHardware/toolHardware/toolHardware/toolSAW-1
| |
| | |
| Hardware/toolTH-1
| |
| | |
| TH-2
| |
| | |
| TAP-8
| |
| | |
| TAP-9
| |
| | |
| TAP-10
| |
| | |
| TAP-6
| |
| | |
| store
| |
| | |
| store
| |
| | |
| store
| |
| | |
| store
| |
| | |
| store
| |
| | |
| store
| |
| | |
| store
| |
| | |
| store
| |
| | |
| store
| |
| | |
| LIST FOR FULL-SERVICE BICYCLE RETAILERS
| |
| | |
| 4
| |
| | |
| ITEM
| |
| | |
| Tap – 1/2” x 20 TPI (pedals)
| |
| | |
| Heli-coil brand thread repair kits in 10x1,
| |
| | |
| 6x1, and 5x0.8mm
| |
| | |
| Hammer – double sided
| |
| | |
| Punch set (including drift and chisel)
| |
| | |
| Soldering gun (plus solder and flux)
| |
| | |
| Scissors
| |
| | |
| Knife
| |
| | |
| Pick set
| |
| | |
| Flashlight
| |
| | |
| BOTTOMBottom bracket tap set
| |
| | |
| (includes BSC threaded taps)
| |
| | |
| Italian taps (36mm x 24 TPI)
| |
| | |
| 2 required for tapping and facing
| |
| | |
| Bottom bracket tool – cartridge style
| |
| | |
| Bottom bracket tool – cartridge style
| |
| | |
| Campangolo® Mirage, KHS, Thun & similar
| |
| | |
| Bottom bracket/cassette lockring tool –
| |
| | |
| Campagnolo® Record bottom bracket and
| |
| | |
| Campagnolo® cassette lockring
| |
| | |
| Bottom bracket tool – hand wrench
| |
| | |
| 16-notch 44–45 OD cup
| |
| | |
| Fits Shimano® Hollowtech II, Race Face®
| |
| | |
| X-type, SRAM®, Truvativ®, FSA®, others
| |
| | |
| Adjusting cap tool – Shimano® Hollowtech II
| |
| | |
| Tool for self-extracting/one-key release | |
| | |
| caps on SRAM® and RaceFace® cranks
| |
| | |
| with a 16 mm hex hole
| |
| | |
| Bottom bracket tool – 8-notch cups, i.e.,
| |
| | |
| Bontrager®, Shimano® XTR M950 BB, Tru-
| |
| | |
| vativ®, eBike lockring for some Bosch®
| |
| | |
| PARK TOOL # / DESCRIPTIONTAP-3
| |
| | |
| Tool store or other distributors | |
| | |
| HMR-4
| |
| | |
| Hardware/tool store
| |
| | |
| Hardware/tool store
| |
| | |
| SZR-1
| |
| | |
| UK-1
| |
| | |
| UP-SET
| |
| | |
| Hardware/tool store
| |
| | |
| BRACKET
| |
| | |
| BTS-1
| |
| | |
| <nowiki>#</nowiki>693
| |
| | |
| BBT-22
| |
| | |
| BBT-4
| |
| | |
| BBT-5/FR-11
| |
| | |
| PRIMARYSECONDARY
| |
| | |
| BBT-9
| |
| | |
| BBT-10.2
| |
| | |
| BBT-16
| |
| | |
| BBT-18
| |
| | |
| RECOMMENDED TOOL LIST FOR FULL-SERVICE BICYCLE RETAILERS
| |
| | |
| 5
| |
| | |
| ITEM
| |
| | |
| Bottom bracket tool – socket type
| |
| | |
| 16-notch 48–50 mm OD cup
| |
| | |
| Fits FSA® MegaEvo® and more
| |
| | |
| Bottom bracket tool – socket type
| |
| | |
| 36-notch 51–53 mm OD cup
| |
| | |
| Fits Praxis® M30
| |
| | |
| Bottom bracket tool – socket type
| |
| | |
| 36-notch 51–53 mm OD cup
| |
| | |
| Fits Praxis® M35
| |
| | |
| Bottom bracket tool – socket type
| |
| | |
| 12-notch 50–53 mm OD cup
| |
| | |
| Fits Chris King® ThreadFitTM T47, Chris
| |
| | |
| King® ThreadFitTM 30
| |
| | |
| Bottom bracket tool – socket type
| |
| | |
| 16-notch 52–54 mm OD cup
| |
| | |
| Fits Enduro® T47, Enduro® PF30
| |
| | |
| Bottom bracket tool – socket type
| |
| | |
| 12-notch 45–47 mm OD cup
| |
| | |
| Fits BSA30 threaded adaptors
| |
| | |
| Bottom bracket tool – socket type
| |
| | |
| 16-notch 44–45 OD cup
| |
| | |
| Fits Shimano® Hollowtech II, Race Face®
| |
| | |
| X-type, SRAM®, Truvativ®, FSA®, others
| |
| | |
| Bottom bracket tool – socket type
| |
| | |
| 16-notch 41–42 mm OD cups
| |
| | |
| Fits Shimano® Ultegra 6800
| |
| | |
| Bottom bracket tool – socket type
| |
| | |
| 16-notch 39–40 mm OD cups
| |
| | |
| Fits Shimano® XTR and Dura-Ace
| |
| | |
| Shimano® STEPS® with square spindle
| |
| | |
| Bottom bracket tool – hand wrench
| |
| | |
| 16-notch cup bearings for Shimano® Di2
| |
| | |
| eleven speed and FSA® MegaEvo thread-
| |
| | |
| ed external bearings
| |
| | |
| Bottom bracket bearing press and extractor
| |
| | |
| set
| |
| | |
| 36mm fixed cup spanner – cup and cone
| |
| | |
| adjustable bottom brackets, plus pin span-
| |
| | |
| ner
| |
| | |
| PARK TOOL # / DESCRIPTIONBBT-27.3
| |
| | |
| BBT-35-12
| |
| | |
| BBT-35-36
| |
| | |
| BBT-47-12
| |
| | |
| BBT-47-16
| |
| | |
| BBT-79.3
| |
| | |
| BBT-69.4
| |
| | |
| BBT-59.3
| |
| | |
| BBT-49.3
| |
| | |
| BBT-29
| |
| | |
| BBP-1.2 & BBP-AOS
| |
| | |
| HCW-4
| |
| | |
| PRIMARYSECONDARY
| |
| | |
| RECOMMENDED TOOL LIST FOR FULL-SERVICE BICYCLE RETAILERS
| |
| | |
| 6
| |
| | |
| ITEM
| |
| | |
| Lockring spanner – double-sided 1 notch
| |
| | |
| and 3 notch type
| |
| | |
| Adjustable cup pin spanners
| |
| | |
| Lockring tool – Bosch® Gen 2
| |
| | |
| Lockring tool – Shimano® STEPS®
| |
| | |
| Lockring tool – single chainrings
| |
| | |
| Lockring tool – Shimano® single chainring
| |
| | |
| Head tube facing/reaming handle set
| |
| | |
| Reamer extension for deep insert headsets
| |
| | |
| Reamer/Racer – Campagnolo® Hiddenset
| |
| | |
| (integrated)
| |
| | |
| Reamer/Facer – IS headset (integrated)
| |
| | |
| Facer – ZS41 and PF30 shells
| |
| | |
| Facer – ZS56 headset
| |
| | |
| Pilot for facing internal headsets, used with
| |
| | |
| 690-XL
| |
| | |
| Fork column threading & chasing tool
| |
| | |
| Crown race facing tool
| |
| | |
| Crown race facing tool-oversized crowns
| |
| | |
| Headset press
| |
| | |
| 36/32 mm lower race spanner (threaded
| |
| | |
| headsets)
| |
| | |
| Headset race removal tool 1” to 1 1/4”
| |
| | |
| Headset race removal tool – 1.5” to 2”
| |
| | |
| Fork race removal tool
| |
| | |
| PARK TOOL # / DESCRIPTIONHCW-5
| |
| | |
| PRIMARYSECONDARY
| |
| | |
| SPA-1
| |
| | |
| LRT-1
| |
| | |
| LRT-2
| |
| | |
| LRT-3
| |
| | |
| LRT-4
| |
| | |
| HEADSET
| |
| | |
| HTR-1 (with 30.0mm reamer), or
| |
| | |
| HTR-1B (with 33.8mm reamer)
| |
| | |
| <nowiki>#</nowiki>769
| |
| | |
| <nowiki>#</nowiki>761S.2
| |
| | |
| <nowiki>#</nowiki>756S.2
| |
| | |
| <nowiki>#</nowiki>690-XL
| |
| | |
| <nowiki>#</nowiki>690-XXL
| |
| | |
| <nowiki>#</nowiki>768
| |
| | |
| FTS-1
| |
| | |
| CRC-1
| |
| | |
| CRC-15
| |
| | |
| HHP-2
| |
| | |
| HCW-15
| |
| | |
| RT-1
| |
| | |
| RT-2
| |
| | |
| CRP-2
| |
| | |
| Fork race installer – 1” and 1 1/8” columns
| |
| | |
| CRS-1
| |
| | |
| Fork race installer – 1.5” column
| |
| | |
| CRS-15.2
| |
| | |
| RECOMMENDED TOOL LIST FOR FULL-SERVICE BICYCLE RETAILERS
| |
| | |
| 7
| |
| | |
| ITEM
| |
| | |
| Saw guide – threaded 1” fork
| |
| | |
| Saw guide – threadless fork
| |
| | |
| Saw guide – Oversized for seat posts, fork
| |
| | |
| steerer tubes and other round tubes
| |
| | |
| Saw guide – for carbon fiber-specific
| |
| | |
| blades
| |
| | |
| Threadless star nut installer
| |
| | |
| CHAINCrank extractor – square spindle
| |
| | |
| Crank extractor – ISIS Drive & Shimano®
| |
| | |
| Octalink type
| |
| | |
| Chain cleaning tool
| |
| | |
| Rear cluster cleaning brush
| |
| | |
| Chainring sleeve nut wrench
| |
| | |
| Chain tool – compatible with derailleur
| |
| | |
| chain (including 13 speed), 1/8” and 3/16”
| |
| | |
| Master link pliers
| |
| | |
| Chain wear measurement tool
| |
| | |
| Chain wear measurement tool –
| |
| | |
| SRAM® Red AXS compatible
| |
| | |
| Pedal wrench
| |
| | |
| Pedal wrench crows foot
| |
| | |
| Dummy pedal
| |
| | |
| Chain whip
| |
| | |
| Freewheel tool wrench handle
| |
| | |
| Cassette lockring tool
| |
| | |
| Cassette lockring tool for 12mm thru axle
| |
| | |
| hubs
| |
| | |
| Freewheel removal tool –
| |
| | |
| Shimano® splined type
| |
| | |
| PARK TOOL # / DESCRIPTIONSG-1
| |
| | |
| SG-6
| |
| | |
| SG-7.2
| |
| | |
| SG-8
| |
| | |
| TNS-4
| |
| | |
| & DRIVETRAIN
| |
| | |
| CCP-22 or CWP-7
| |
| | |
| CCP-44 or CWP-7
| |
| | |
| CM-5.3
| |
| | |
| GSC-1
| |
| | |
| CNW-2
| |
| | |
| CT-3.3
| |
| | |
| MLP-1.2
| |
| | |
| CC-2 or CC-3.3
| |
| | |
| CC-4
| |
| | |
| PW-4
| |
| | |
| TWB-15
| |
| | |
| DP-2
| |
| | |
| SR-12.2 or SR-2.3
| |
| | |
| FRW-1
| |
| | |
| FR-5.2G
| |
| | |
| FR-5.2GT
| |
| | |
| FR-1.3
| |
| | |
| PRIMARYSECONDARY
| |
| | |
| RECOMMENDED TOOL LIST FOR FULL-SERVICE BICYCLE RETAILERS
| |
| | |
| 8
| |
| | |
| ITEM
| |
| | |
| Freewheel removal tool –
| |
| | |
| Suntour® two-notch
| |
| | |
| Freewheel removal tool –
| |
| | |
| Suntour® four-notch
| |
| | |
| Freewheel removal tool –
| |
| | |
| Atom® and Regina® splined type
| |
| | |
| Freewheel removal tool –
| |
| | |
| Single speed BMX
| |
| | |
| Freewheel removal tool –
| |
| | |
| Falcon® freewheels
| |
| | |
| Freewheel removal tool –
| |
| | |
| Compact single speed
| |
| | |
| WHEEL,Wheel truing stand – main bench
| |
| | |
| Wheel truing stand – secondary benches
| |
| | |
| Wheel dish gauge
| |
| | |
| Spoke wrenches
| |
| | |
| Spoke wrench – Campagnolo® 5.5 & 6 mm
| |
| | |
| nipples
| |
| | |
| Spoke wrench – Mavic® type, 7 splines
| |
| | |
| Spoke wrench – Mavic® type, 6 splines
| |
| | |
| Spoke wrench – Shimano® system wheels
| |
| | |
| Spoke wrench – internal nipples
| |
| | |
| Spoke length ruler
| |
| | |
| Spoke tension meter
| |
| | |
| Cone wrench set – 13–24 mm, 26 and 28 mm
| |
| | |
| Hub bearing press
| |
| | |
| Tire levers
| |
| | |
| Tire levers – steel, heavy duty
| |
| | |
| Tire seating pliers
| |
| | |
| PARK TOOL # / DESCRIPTIONFR-2
| |
| | |
| FR-3
| |
| | |
| FR-4
| |
| | |
| FR-6
| |
| | |
| FR-7
| |
| | |
| FR-8
| |
| | |
| HUB & TIRE
| |
| | |
| TS-4.2
| |
| | |
| TS-2.3
| |
| | |
| WAG-4
| |
| | |
| SW-0, SW-1, SW-2, SW-3, SW-
| |
| | |
| 40, SW-42
| |
| | |
| SW-11
| |
| | |
| SW-12
| |
| | |
| SW-13
| |
| | |
| SW-14.5
| |
| | |
| SW-15
| |
| | |
| SBC-1
| |
| | |
| TM-1
| |
| | |
| SCW-SET.3
| |
| | |
| HBP-1
| |
| | |
| TL-4.2 or TL-6.2
| |
| | |
| TL-5
| |
| | |
| PTS-1
| |
| | |
| PRIMARYSECONDARY
| |
| | |
| RECOMMENDED TOOL LIST FOR FULL-SERVICE BICYCLE RETAILERS
| |
| | |
| 9
| |
| | |
| ITEM
| |
| | |
| Valve core remover
| |
| | |
| Fourth hand tool
| |
| | |
| Piston press for hydraulic brake calipers
| |
| | |
| Metric flare nut wrench – 8 mm and 10 mm
| |
| | |
| Hydraulic brake bleed kit – mineral
| |
| | |
| Hydraulic brake bleed kit – D.O.T.
| |
| | |
| Hydraulic brake line cutter and barb install-
| |
| | |
| er
| |
| | |
| Disc brake facing tool for post mount, flat
| |
| | |
| mount and IS mount
| |
| | |
| Diamond abrasive cutter for carbon fiber
| |
| | |
| disc brake mounts
| |
| | |
| Disc rotor truing gauge
| |
| | |
| Disc rotor truing gauge dial indicator
| |
| | |
| Rotor truing fork
| |
| | |
| Cable cutter
| |
| | |
| End cap crimping pliers
| |
| | |
| Offset brake wrench
| |
| | |
| Thin open-ended wrenches
| |
| | |
| Internal cable, housing and wire routing kit
| |
| | |
| Frame alignment gauge
| |
| | |
| Bending tool, leverage assistance
| |
| | |
| Dropout alignment tools
| |
| | |
| Derailleur hanger alignment tool
| |
| | |
| Kickstand removal tool
| |
| | |
| Frame holder for alignment
| |
| | |
| PARK TOOL # / DESCRIPTIONVC-1
| |
| | |
| BRAKES
| |
| | |
| BT-2
| |
| | |
| PS-1 and/or PP-1.2
| |
| | |
| MWF-3
| |
| | |
| BKM-1.2
| |
| | |
| BKD-1.2
| |
| | |
| HBT-1
| |
| | |
| PRIMARYSECONDARY
| |
| | |
| DT-5.2
| |
| | |
| 2197
| |
| | |
| DT-3
| |
| | |
| DT-3i.2
| |
| | |
| DT-2
| |
| | |
| CN-10
| |
| | |
| EP-1
| |
| | |
| OBW-3
| |
| | |
| CBW-1 (8 and 10 mm)
| |
| | |
| CBW-4 (9 and 11 mm)
| |
| | |
| FRAME
| |
| | |
| IR-1.2
| |
| | |
| FAG-2
| |
| | |
| FFS-2
| |
| | |
| FFG-2
| |
| | |
| DAG-3
| |
| | |
| Bicycle supply distributors
| |
| | |
| Thread in old steel cups and
| |
| | |
| mount bike in vise on cups
| |
| | |
| RECOMMENDED TOOL LIST FOR FULL-SERVICE BICYCLE RETAILERS
| |
| | |
| 10
| |
| | |
| ITEM
| |
| | |
| PARK TOOL # / DESCRIPTIONSuspension bearing extractor and installa-
| |
| | |
| SBK-1
| |
| | |
| tion kit
| |
| | |
| Suspension shock fork and rear shock
| |
| | |
| These tend to be very propri-
| |
| | |
| service tools
| |
| | |
| etary. Contact fork or shock
| |
| | |
| manufacturer directly.
| |
| | |
| CONSUMABLES
| |
| | |
| Grease
| |
| | |
| PPL-1 (tube) or PPL-2 (tub)
| |
| | |
| High-performance grease for bearing
| |
| | |
| HPG-1
| |
| | |
| applications
| |
| | |
| Light lubricant for chains, etc.
| |
| | |
| CL-1
| |
| | |
| Anti-seize compound for thread preparation
| |
| | |
| ASC-1
| |
| | |
| Assembly compound
| |
| | |
| SAC-2
| |
| | |
| Thread locker compound
| |
| | |
| TLR-1
| |
| | |
| Retaining compound
| |
| | |
| RC-1
| |
| | |
| Cutting fluid for all machining
| |
| | |
| CF-2
| |
| | |
| Work apron
| |
| | |
| SA-3 or SA-1
| |
| | |
| Nitrile gloves
| |
| | |
| PRIMARYSECOND
| |